Selecting a Pressure Gauge | Forberg Scientific

Selecting a Pressure Gauge

/, WIKA Pressure Gauges/Selecting a Pressure Gauge

Selecting a Pressure Gauge

When selecting a pressure gauge, it is important to consider the following factors to ensure safety and accuracy:

1. Pressure fluid composition
2. Pressure fluid temperature
3. Ambient conditions
4. Pressure range
5. Conditions affecting wear of the system
6. Method of mounting
7. Required accuracy

1. Pressure fluid composition
Since the sensing element of a pressure gauge may be exposed directly to the measured medium, consider the characteristics of this medium. It may be corrosive, it may solidify at various temperatures or it may contain solids that will leave deposits inside the sensing element. For pressure fluids that will not solidify under normal conditions or leave deposits, a Bourdon tube gauge is acceptable. Otherwise a Sealgauge or diaphragm seal should be used. A chemical compatibility chart follows this section to aid in the selection of the proper sensing element material.

2. Pressure fluid temperature
Steam and other hot media may raise the temperature of the gauge components above safe working limits of the sealed joints. In these cases it is recommended that a siphon, cooling tower or diaphragm seal be used in conjunction with the pressure gauge.

3. Ambient conditions
The normal ambient temperature range for WIKA pressure gauges is -40F to +140F (-4C to +60C) for dry or silicone-filled gauges and -4F to +140F (-20C to +60C) for glycerine-filled gauges. The error caused by temperature changes is +0.3% or -0.3% per 18F rise or fall, respectively. The reference temperature is 70F (20C). The correction is for the temperature of the gauge and not the temperature of the measured medium. Remote gauge mounting using a diaphragm seal and capillary line is one alternative for applications involving extreme ambient temperature. Moisture and weather effects must also be considered. Liquid-filled gauges prevent condensation build up. For outdoor use, stainless steel, brass or plastic cased gauges are recommended.

4. Pressure range
A
gauge range of twice the working pressure is generally selected. The working pressure in all cases should be limited to 75% of the gauge range. Where alternating pressure and pulsation are encountered, working pressure should be limited to 2/3 of the gauge range.

5. Conditions affecting wear of the system
In applications involving severe pressure fluctuation or pulsation, the use of restrictors and/or snubbers is recommended. In addition,
liquid-filled gauges increase the service life of gauges in these conditions. WIKA liquid filled gauges are generally filled with glycerine. Silicone for larger temperature extremes and Halocarbon® for use with oxidizing agents such as chlorine, oxygen and hydrogen peroxide are also available.

6. Method of mounting
Radial (LM) and back (CBM or LBM) connections are available for most
WIKA gauges. WIKA stocks gauges with standard NPT threaded connections. Other types such as metric threads, straight threads, hose barbs and special fittings are available as a special order. Pressure gauges should be mounted in the upright position. For applications where the gauge is mounted side ways, horizontally or upside down, contact WIKA or Forberg Scientific Inc. Customer Service for gauge type compatibility.

7. Required accuracyWIKA stocks gauges with accuracies from ± 3/2/3% to ±0.1% of span (ASME Grade B to Grade 4A).

To ensure safe and accurate gauge selection, you must take all of the above factors into consideration. When in doubt, please do not hesitate to contact Forberg Scientific Inc. Customer Service for assistance!
Toll Free: 855-288-5330
Email: mechanicalsales@forberg.com

By | 2016-08-17T06:36:35+00:00 August 17th, 2016|WIKA, WIKA Pressure Gauges|0 Comments