Forberg - Accessories for Roof & Gutter De-Icing

Home >> Nelson Heat Trace >> Nelson Roof & Gutter De-Icing Products >> Accessories for Roof & Gutter De-Icing

Common Accessories needed for installing Roof & Gutter De-Icing Systems. Power Connetions Kits, Entry Seal Kits, Roof Mounting Clips, Downspout Hangers, Splice Kit, End Seal Kits, Power End Seal Kits and Aluminum Foil Tape

If you have any questions about the Nelson needed for roof and gutter deicing. Please contact the Forberg Scientific Process Team at 248-288-5990 for pricing and availability. You can contact the Process Team by the following email: processsales@forberg.com

Item ID	Description		Price
SS-1	Automatic Snow/Ice Melting ControllerOperating Temperature: 38°F +/-1°F Power Switch OFF Tempe: 112°F Power Switch ON Temp: 86°F Power Supply Voltage: 120VAC Frequency: 50/60 Hz Maximum Power Consumption: 60W Output Type: 16A Relay	Call	$648.15/EA

SLT-D	Downspout Hangars 5 pkgDownspout Hangars are used to support the heater cable where it enters or exits a downspout. 1 hanger is required for each downspout. If downspout is in the middle of a circuit, the cable is looped down to the bottom of drain and back up.	7	$253.07/PK

SLT-E	End Seal Kit 5 pkgEnd Seal Kit- provides a moisture seal at the end of each heater cable circuit. Each kit contains 5 seals.	3	$34.66/PK

SLT-ES	Entry Seal KitEntry Seal Kit- provides a watertight entry seal into a junction box (not included in this kit). It is recommended that a NEMA 3R, 4 or 4X box be used and mounted under an eave or other protected area. One entry per SEAL INTO JUNCTION BOX (NOT INCLUDED)	Call	$29.89/EA

SLT-LPS	Power Connection KitIncludes moisture seals for both ends of the heater cable as well as a watertight entry seal into a junction box (not included in this kit). It is recommended that a NEMA 3R, 4 or 4X box be used and mounted under an eave or other protected area.	6	$49.26/EA

SLT-P	Power End Seal Kit 5 pkgPower End Seal Kit- provides a moisture seal at the power connection end of the heating cable to prevent electrical arcing if condensation occurs in the connection box. Each kit contains 5 seals	2	$21.35/EA

SLT-S	Splice Kit 5 pkgSplice Kit- is used to splice two pieces of cable together. This could occur when additional cable is needed or a damaged spot must be cut out and repaired. Each kit contains 5 splices.	4	$322.84/PK

SLT-C	Universal Roof Mounting Clips 25pkgUniversal Roof Mounting Clips- are used for all types of installations. Clips come 25 to a box; order one box per eight feet of eave or one box for every 100 feet of cable installed on flat roofs.	44	$7.81/PK